Your first choice for family drinking
-
Fast heating in 3 seconds
The quick boiling allows you to make a cup of coffee in 3 seconds
-
Efficient filtration
Multiple Stages, Better Filtration Performance
-
Installation free
The device does not require any installation, just plug and start using it
Quick Boiling, Energy Saving
This instant hot water dispenser provides hot water straight to your cup, so there will be no more waiting for a kettle to boil. The quick boiling allows you to make a cup of coffee in 3 seconds. As it boils the exact water amount you need, compared with traditional kettle that boils water repeatedly, this instant hot water dispenser really saves large amount of energy, which is energy efficient, suitable for both households and workplaces where need to reduce the energy outgoings.
Multiple Stages, Better Filtration Performance
This instant hot water dispenser adopts the advanced composite filter technology which integrates a variety of filter medias for more effective performance. The CF filter has a sediment PP melt blown and an activated carbon block to remove initially big particles and chlorine from water. The MRO stage includes a reverse osmosis membrane, an activated carbon block and a PP melt blown to reduce more contaminants such as TDS and heavy metals.
Plug and Play, Mobility Friendly
The device does not require any installation, just plug and start using it. So it can simply sit anywhere of the countertop that far away from water source, such as living room, dining room, recreation room, etc. The compact design takes up little space, and can fit very well with any room style, so it’s easy to change the location.
Large Tank, Less Refilling
The instant hot water dispenser comes with a large removable reservoir of up to 1.5L capacity, large enough for getting 3L of water continuously (producing water while getting water), so no need to keep refilling it so often. Just need to take out the water tank and refill it with water whenever the water runs out. Besides, the water tank is made from clear so that see through the plastic housing you can easily tell immediately the water level and when it needs refilling.
Specification
| Dimension | 435×178×395mm |
| Applicable inlet water temperature | 5-38℃ |
| Power supply | 220V/50HZ |
| Filter configuration | CF (PP+CB) + MRO(RO+CB+PP) |
| Power rate | 2200W |
| Water tank capacity | 1.5L |
| Flow rate | 0.2L/min(75G) |
| Hot water flow rate(95°C) | 0.4-0.5L/min |
| Heating method | Thick film heating |
